About this deal
Normally 4 or 5 in number, the size is determined by the size of the stud or bolt, either metric or imperial. This can be positive offset, as shown above, where the vertical centre line is behind the seating point, when the wheel is fitted to the hub. Although this may vary depending on the mounting, the side that has a spring is usually mounted liquid or viscous side (oil, grease, water . To neglect this is too run the risk of either the nuts/bolts working loose and the wheel coming off (not tight enough), or damage to and possible shearing of the nut/bolt (over tightened).
A five stud fixing is calculated by taking the measurement from the centre of a stud hole to the edge of the centre bore x 2 + the diameter of the centre bore. Aspect ratio - ratio between the height of the sidewall and the width of the tread, expressed as a percentage.Nominal section width - on radial tyres this is expressed in millimetres, on cross ply tyres, inches are used. The majority of items are dispatched the same day and can be expected to be received within a couple of working days.
Rim diameter : The diameter of the wheel just inside the rim, where the inner edge of the tyre bead sits and normally expressed in inches e.However, to ensure long-term resistance, the FPMSS material will always be supplied with a stainless steel spring, which will not rust in water.