20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector

Product Information

There's a good reference at mattmillan.com which helps to identify different types of JST connectors. Choosing the Right JST Connector". DronesEtc. Archived from the original on 4 March 2016 . Retrieved 13 August 2015.

A teeny weeny surface mount only connector family from JST. Commonly found inside laptops for connecting various items to the motherboard. Housings are available with “wings” to aid disconnection. Housings are “SH” and headers are “SR”. Example part numbers JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). [1] JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors. [2] [3] IWISS IWS-2820M. A copy of the Engineer PAD-11. Not as well made but for the significantly lower price, it could be forgiven. The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the intrusion of flux and other contaminants.The WC-240 is nice to use, but there’s not a lot to set it apart from generic tools for occasional use. I personally crimp a large amount of PH, hence the investment in the official tool. JST Corporate Profile and History". JST. Archived from the original on 27 November 2016 . Retrieved 13 June 2017. JST-SH | Molex Picoblade (1.25mm) | JST-ZH | Molex 2mm | JST-RCY | 1.27mm | AR6400/PKZ3352 | DC | Power department. This allows us to be closer from our French customers and main European decision-makers.

The female PH has a wide cut out and two holes at the bottom (2 mm pin spacing), whereas the XH has two slots from the top towards the bottom (2.5 mm pin spacing). surface mounting), insulation displacement (IDC), board to board, board to wire, wire to wire, LED, waterproof, pitch from 0.1 to 13mm, hand tools, semi-automatic presses and applicators for all our Very similar to the above series, however in a dual row configuration. Commonly used in LCD / LVDS applications. GH (1.25mm pitch)JST manufactures a large number of series (families) of connectors. [2] The PCB (wire-to-board) connectors are available in top (vertical) or side (horizontal) entry, and through-hole or surface-mount. Among our electric components, we can put forward a wide variety of innovative catalog products and crimping tools: FFC/FPC connectors (insertion strength zero, no ZIF), to crimp/crossing, SMT/CMS To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations. The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately. See the top left female connector in this photo from Common JST Connector Types - PH (2.0mm pitch):

Note: Some 2.50 mm parts are incorrectly sold on the internet as 2.54mm (0.100in), and the 1.25mm parts as 1.27mm (0.050in). It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.We recommend you own a set of crimping pliers as well, such as these nice ones from Engineer - they're easier to use than trying to crimp with pliers. For more obscure types, no hand tool is offered, however JST do sell a hand frame (YRS-XXX) for mounting dies for their MKS-L applicator (used in the AP-K2N crimping machine), a very expensive solution, and the only option for production/mission critical applications. Unofficial / Generic ZH is one of the smallest pitch types of through-hole JST connector. Types smaller than this are all SMD. I am told these are common 3D printer related applications. Example part numbers Like the above series, also surface mount only however featuring positive latching mechanism and a completely different type of mating surface. VH (3.96mm pitch) This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width.