Audiolab DC Block Direct Current Blocker Mains Conditioner (Black)

Product Information

The science absolutely guarantees that removing DC improves a transformers ability to do its job, and therefore it is very likely to make an audible difference in audio equipment. I bet your speakers were designed on a clean mains supply, for sure. The Power Box RS2 Phono promises high-purity "linear" power supply for Pro-Ject turntables and phono preamps at the same time. The new power conditioning accessory "Sparkz TC3" from Ansuz Acoustics is designed to reduce noise in the power supply chain thanks to various technologies, and thus improve the sound of hi-fi components. I/O's are not decoupled so in almost any ofthe designs I have scrutinized, interconnects shield noise is landed right on to the PCB instead of grounded to chassis. The stray infects the so delicate 0 volt ref voltage to numerous IC's including the DAC chip. Do not take just my word for it, it is a friend of mine, studio technician, Master of Science educated, at least 40 years in the profession, who rebuild DAC's like dCS, but also cheaper versions like Topping D90SE, who claims that ground ref is is a design flaw in it self as are many other areas. The ground is then also challanged by the standard procedure of soldering e.g. pin1 but also shields in USB's, I2S UI, etc in the PCB. The PCB ground should not be used to land noise from cable shield in my opinion. So when decoupling, you should be able to trust the ground you decouple to., but you cannot. One thing so often overlooked is the use of filter and buffert electrolythic caps. They are in the analogue domain often soldered i pairs from the positive and negative to the ground, instaed of caring for the ground by having one twice the size directly between positive and negative only. The filter caps for purely decoupling is wired equally. Why? Some brands use local regulators some do not. In my opinion all voltage regulators should of top class with a few microvolts ripple if any, and locally, with a large buffer, zobel and decoupling almost at the same pin as it is designed to feed. Hifi grade el caps is a myth. The modern 105 degree offers in general better life expectancy and radically lowered internal losses for decoupling.

The Polish brand Ferrum launches the "Power Splitter", a matching accessory for the external power supply Hypsos, with which it is supposd to power two devices simultaneously. And in even shorter summary - that’s why I’ll be inclined to try one in my system to see if it can help improve performance. Second, it reduces the potential problem of popping or thumping when you turn on the power amp. If nothing is coming out of your preamp or other upstream device, such pops won't be too bad, but if said upsteam device has a DC offset, big pop/thump.There is a very slight hum coming from my turntable. I only know this, as when I approach my hifi to change records. I can hear it. I've never noticed it when playing music. Many many years ago. I replaced my cheap bell wire with a QED79 cable. Connected it up to my Pioneer SA608 and Kef Celeste III speakers. Didn't hear a difference.

The actual problem is not that everything should be designed as optimal as possible. It should be designed good enough. A quite cheap and not very sophisticated filter design, offering a substandard DC-filtration, unless the reqtifier bridge is not spec'd with higher forward voltage diodes. The decoupling is very rrudimentory as well and will do some good, but since no resistor loads are implemented it will not cancel possible resonances. DC doesn’t make your cone hum. It doesn’t hiss and it doesn’t whistle, so no matter how close you get, you won’t hear it. Additionally, this dual-action device is said to boast a high-performance audio class filtering circuit that removes RFI/EMI contaminants from the mains supply. We are informed that this reduces both differential-mode noise (exacerbated by cheap switch-mode power supplies used by many home appliances) and common-mode noise (aggravated by airborne interference from phones, Wi-Fi networks and Bluetooth).Admittedly, it's quite a basic circuit to filter it and I've obviously never auditioned this audiolab unit but if your transformer is affected by DC, which it almost certainly will be if you have a fridge, washing machine and dish washer on your home mains, and if this circuit is correct (which I'm sure it would be), it's not snake oil to suggest that it would work. It's physics. I’m replying out of courtesy to explain with rationality and fact, rather than try and convince. I think a lot of people would also make the same assumption so please don’t take offence but I think youre missing the point of a DC filter and what it actually (not supposedly) does.